Multi-tech-systems MVP120 Manual do Utilizador Página 25
- Página / 104
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Multi-Tech Systems, Inc. MultiVOIP User Guide
Chapter 4 - Configuring the Master MultiVOIP
25
15. The Ring Count FXO box enables you to set the number of rings received on the
FXO interface before hanging up and releasing the line to another call. The default
setting is 2 rings.
Note: Zero (0) means no incoming calls will be answered.
For FXO-to-FXO communications, you can enable a specific kind of FXO
Disconnect Options: Current Loss, Tone Detection, or Silence Detection. Check
with your in-house phone personnel to verify the type of disconnect to use. If current
loss is checked, the VOIP will hang up when it detects a loss of current on the FXO
(phone) port. For tone detection, select from the lists one or two tones that will
cause the line to disconnect. The person hanging up the call must then press the key
or keys that produce those tones to hang up a call. For silence detection, select
One Way or Two Way, then set the timer for the number of seconds of silence before
disconnect. The default value of 15 seconds may be shorter than desired for your
application.
The Message Waiting Light check box must be selected on the originating and
answering voice channel. This enables the number dialed to connect you to the
appropriate voice channel, then output that number on the voice channel.
16. The Voice/Fax tab displays the parameters for the voice gain, DTMF (Dual Tone
Multi-Frequency) gain, voice coder, faxing, and advanced features such as Silence
Compression, Echo Cancellation, and Forward Error Correction.
17. You can set up the input and output voice gain so that the volume can be increased
or decreased. Input gain modifies the level of the audio coming into the voice channel
before it is sent over the Internet to the remote MVP120. Output gain modifies the
level of the audio being output to the device attached to the voice channel. Make your
selections from the Input and Output lists in the Voice Gain group. The valid range is
+31dB to –31dB with a recommended/default value of 0.
You can also set up the DTMF gain (or output level in decibels - dB) for the higher
and lower frequency groups of the DTMF tone pair. Make your selections in the lists
in the DTMF Gain group. When the DTMF Out of Band check box is selected, the
tones are passed via RTP packets, and the receiving VOIP reproduces the DTMF
tones instead of passing them through like voice.
Note: Only change the DTMF gain under the direction of Multi-Tech Technical
Support.
18. To change the voice coder, select the Manual option in the Coder group. Select the
appropriate coder from the Selected Coder list.
- Voice/Fax Over IP Networks 1
- Model MVP120 1
- H.323 Mode 1
- User Guide 1
- Contents 3
- Chapter 1 5
- Preview of This Guide 7
- Typical Application 8
- The Gatekeeper 9
- Proprietary Phone Book 10
- Front Panel Description 12
- Back Panel Description 13
- Specifications 14
- Chapter 2 15
- Installation 15
- Chapter 2 - Installation 16
- Unpacking Your MVP120 17
- Telecom Safety Warning 17
- Other Safety Warnings 17
- Cabling Your MVP120 18
- Chapter 3 19
- Chapter 4 23
- Chapter 5 36
- Chapter 6 43
- Deploying the VOIP Network 43
- Remote Site Administrator 44
- Power Connection 44
- Ethernet Connection 44
- Chapter 7 45
- Using the MultiVOIP Software 45
- (utility) 46
- MVP120 Configuration 47
- Changing Channel Parameters 48
- Interface Tab 48
- Voice/Fax Tab 49
- Billing/Misc Tab 50
- Regional Tab 51
- Changing IP Parameters 57
- Viewing Call Progress 58
- Applications Setup 59
- Viewing Statistics 60
- IP Statistics 60
- SNMP Statistics 61
- Viewing Logs 62
- Viewing Log Entry Details 62
- Viewing Channel Totals 63
- Upgrade Procedures 64
- Upgrade Software 64
- Manual Upgrade Procedure 66
- Chapter 8 67
- Modem-Based 68
- LAN-Based 70
- MultiVOIP Telnet Server Menu 72
- Voice over IP Configuration 72
- Phone Directory Database 72
- Phone Directory Configuration 72
- Web Management 73
- Chapter 9 74
- Warranty 75
- Ordering Accessories 77
- Technical Support 78
- Appendixes 79
- Internet Protocol (IP) 82
- Appendix B - Cabling Diagrams 83
- Remote Configuration Cable 84
- Class A Statement 85
- Fax Branding Statement 85
- FCC Part 68 Telecom 86
- Canadian Limitations Notice 87
- Glossary 100
Manuais e produtos relacionados com Hardware Multi-tech-systems MVP120
(28 páginas)Rockwell Automation 440G Trojan T15 Tongue Operated Guard Interlock Sw manuály
Uživatelské manuály a uživatelské příručky pro Zařízení Rockwell Automation 440G Trojan T15 Tongue Operated Guard Interlock Sw.
Poskytujeme 1 manuály pdf Rockwell Automation 440G Trojan T15 Tongue Operated Guard Interlock Sw ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais