Multi-Tech Systems ISI5634PCI/4/8 Manual do Utilizador descarregar pdf (Página 86)

ISI5634PCI/4/8 User Guide

Command: &Zy=x Store Dialing Command

Values: y = 03 (callback security disabled) or 029 (callback

security enabled)

x = Dialing command

Default: None

Description: Stores dialing command x in memory location y. Dial the

stored number using the command ATDS=y. See also

the #CBSn command. For callback security options, see

Chapter 6.

Command: \An Select Maximum MNP Block Size

Values: n = 0, 1, 2, or 3

Default: 3

Description: \A0 64-character maximum.

\A1 128-character maximum.

\A2 192-character maximum.

\A3 256-character maximum.

Command: \Bn Transmit Break

Values: n = 09 in 100 ms units

Default: 3

Description: In non-error-correction mode only, sends a break signal

of the specified length to a remote modem. Works in

conjunction with the \K command.

Command: \Gn Modem Port Flow Control

Values: n = 0

Default: 0

Description: \G0 Returns an OK for backward compatibility with some

software.

\G1 Not supportedresponds ERROR.

Command: \Jn Data Buffer Control

Values: n = 0

Default: 0

Description: \J0 Enable data bufferserial port speed is independent of

connect speed.

\J1 Disable data bufferserial port speed is forced to the

line speed.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 121 122

Sem comentários

Multi-Tech Systems ISI5634PCI/4/8 Manual do Utilizador Página 86